Home > News > Plasma Flame Cutting Machine Safety Operation Guide
Plasma Flame Cutting Machine Safety Operation Guide

Plasma Flame Cutting Machine Safety Operation Guide

2019-01-08

Use a reasonable assembly cutting sequence: the steel structure should be assembled as a whole and then cut as much as possible. The electrode and nozzle in the torch should not be loose during use. The electrode must be tightened with a special wrench. It must be viewed before each use. If it is loose, use a special wrench to tighten it at any time, but you cannot use tools such as a spanner.

The compressed air used must be dry and clean. Because water vapor and oil are easily conductive, spiral black lines are formed on the electrodes, indicating that water vapor and oil are too much, causing the electrodes and the nozzle cavity to be short-circuited by arc, which is easy to damage the torch and cannot work normally. When replacing consumables, put them on a clean flannel. Always check the connection rib of the torch and clean the electrode contact surface and nozzle with a hydrogen peroxide cleaner.

Share to:  
Previous: How to extend the service life of power supply parts of CNC plasma cutting machine Next: Plasma cutting machine - Why choose us?